Wood Oil WoodEx Aqua Decking Oil

£42.23£146.25

Water-borne, hybrid binder based, non-film-forming transparent wood stain for outdoor use. Protects wooden surfaces from moisture, soiling and when tinted from UV radiation of the sun.

SKU: N/A Categories: , ,

Description

Water-borne, hybrid binder based, non-film-forming transparent wood stain for outdoor use. Protects wooden surfaces from moisture, soiling and when tinted from UV radiation of the sun.

New wood and wood previously treated with non film-forming wood stain, e.g. walls, doors, window frames, fences and poles. Recommended especially for log surfaces. Not suitable for use on film-forming wood stains, nor in greenhouses, hotbeds or shelters for livestock. It is not recommended to use WOODEX AQUA CLASSIC untinted since tinting protects wood from turning grey due to UV radiation of the sun.

Additional information

Litres

10L, 1L, 3L

Colors

Brown, Clear

PRODUCT TYPE

Water-borne wood oil for outdoor use

USAGE

Natural oil for outdoor use for protection of garden deck floors, jetties and wooden garden furniture. Other suitable objects are fences, trellises, doors and stairs. For untreated, heat-treated and press-impregnated wood. Applied on clean, dry wooden surface by brush, sponge or by dipping. Protects wooden surfaces from moisture, soiling and when tinted from UV radiation of the sun. Deminishes cracking of the wooden surface. Not suitable for greenhouses, hotbeds and shelters for livestock.

TECHNICAL DATA Solids

About 10 % by volume

Volatile organic compound (VOC)

The product is not included in the EU VOC directive

Practical spreading rate

Sawn timber 5 – 8 m?/l Planed timber 8 – 10 m?/l

Density

abt. 1.0 g/ml

Drying time, +23?C - dust free - dry

after 4 hours after 16 hours Mechanical abrasion on the surface is to be avoided during the first few days. If a renewed treatment is required, it can be applied after about 24 hours. The drying process will be slower in cold and/or damp.

Thinner, clean up

Water. Wash the equipment immediately after use with detergent and warm water.

Finish

Is absorbed into the wood and does not usually form any visible film

Colours

Clear, brown, grey and translucent colours

Weather resistance

For surfaces that are continuously exposed to weathering a renewed treatment is done yearly, or whenever required.

DIRECTION FOR USE Surface preparation

Clean the surface to be treated. Use RENSA TERRACE deck cleaner on surfaces to be treated, when needed. Rinse the surfaces thoroughly with water and allow to dry. Remove from the surface all loose and poorly adherent old matter and fluffy top layers of the wood. We recommend that untreated wood is primed with wood preservative from WOODEX-series. Remove old paint or varnish layers before the treatment.

Application

Stir well before application. Tinted product must also be stirred during the application, if needed. Applied on the surface 1 – 2 times by brush, sponge or by dipping. The wood oil can be diluted by 10 – 30% to improve the absorption. Depending on the quality of the wood, the treatment is renewed. The possible excess oil is wiped off.

Application conditions

The surface to be treated must be dry. The relative moisture of the wood must be below 20% of the weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5 ?C and the relative air humidity below 80%. Painting in strong sunlight or in moist weather is to be avoided.

STORAGE

Must not freeze.

Reviews

There are no reviews yet.

Be the first to review “Wood Oil WoodEx Aqua Decking Oil”

Your email address will not be published. Required fields are marked *