Siberian Larch Cladding Woodstain UV Pigmented- Woodex Classic (10L)

Need To Place
A Bespoke Or Bulk Order?

£148.00

Siberian Larch Coating UV Treatment for External Cladding pigmented wood stain to give extra protection to Siberian Larch. Easy to apply and penetrates into the wood and forms no uniform film after the first application. Protects the wood against weather strain by slowing the effects from moisture, UV radiation of the sun and soiling.

New and previously with transparent wood stain treated wooden surfaces, e.g. log surfaces, walls, doors, window frames and fences. Not suitable on film-forming wood stains, nor in greenhouses, hotbeds or shelters for livestock. Not suitable for indoor use.

 

Description

Siberian Larch Coating UV Treatment for External Cladding pigmented wood stain to give extra protection to Siberian Larch. Easy to apply and penetrates into the wood and forms no uniform film after the first application. Protects the wood against weather strain by slowing the effects from moisture, UV radiation of the sun and soiling.

New and previously with transparent wood stain treated wooden surfaces, e.g. log surfaces, walls, doors, window frames and fences. Not suitable on film-forming wood stains, nor in greenhouses, hotbeds or shelters for livestock. Not suitable for indoor use. Please note packaging images may be different.

Additional information

Litres

Product Type

Slightly thixotropic, alkyd-based transparent wood stain for outdoor use. Easy to apply and penetrates into the wood and forms no uniform film after the first application. Protects the wood against weather strain by slowing the effects from moisture, UV radiation of the sun and soiling.

Usage

New and previously with transparent wood stain treated wooden surfaces, e.g. log surfaces, walls, doors, window frames and fences. Not suitable on film-forming wood stains, nor in greenhouses, hotbeds or shelters for livestock. Not suitable for indoor use.

TECHNICAL DATA Solids

About 18 % by volume

Volatile organic compound (VOC)

EU VOC limit value (kat A/f): 700 g/l. The product's VOC: max. 700 g/l.

Practical spreading rate

Sawn timber 5 – 8 m?/l Planed timber and beam 8 – 12 m?/l

Density

abt. 0.8 g/ml

Drying time at +23?C / 50% RH

after 16 hours The drying process will be slower in cold and/or damp

Clean up

TEKNOSOLV 1621 (solvent naphtha)

Finish

Not defined. The product penetrates into the pores of the timber

Colours

Clear and translucent colours. It is not recommended that clear wood stain is used alone due to restricted weather resistance.

Weather resistance

Good

DIRECTION FOR USE Surface preparation

Remove all loose matter, dirt and dust with wire-brush, scrubbing brush or scraper. Wash dirty and/or mildewed surfaces with RENSA FACADE facade cleaner. Rinse the surfaces thoroughly with water and allow to dry.

Application

Stir WOODEX CLASSIC thoroughly before use and also now and then in the course of work. Apply by brush or spray. Apply the wood stain evenly and continuously on the whole length of the beam or timber to avoid making restart points. Treat end grain with special care. Priming with a wood preservative from the WOODEX series is recommended for untreated wood. It is not recommended that clear wood stain is used alone due to restricted weather resistance.

Application conditions

The surface to be treated must be dry. The moisture of the wood must be below 20% of the dry weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the wood stain shall be above +5 ?C and the relative air humidity below 80%.

Reviews

There are no reviews yet.

Be the first to review “Siberian Larch Cladding Woodstain UV Pigmented- Woodex Classic (10L)”

Your email address will not be published. Required fields are marked *

Your Basket
  • No products in the cart.

Stay In The Loop!

Be the first to know! Subscribe to our newsletter for exclusive updates.

Place A Bulk Or Bespoke Order

0